Filter
Top Products
Fax · Dialling a Number 43
EN
Place Documents onto the
Flatbed Scanner
1 Open the scanner cover.
2 Lay the document onto the scanner glass with the
written side down.
3 Align the document with the rear left corner of the
scanner glass (arrow marks). The markings on the
scanner border for the A4 and A5 formats will help
you to position the document correctly.
4 Close the scanner cover.
Dialling a Number
Dialling a Number
Dial the desired number. There are several ways to do
this:
Manual Dialling: Dial the desired number using the
numeric keypad.
Telephone Book
Telephone Book:
1 Press C, 511 and OK.
2 Select an entry using [. Enter the initial letters with
the letter keypad to quickly navigate through the tel-
ephone book.
Redial / caller list
Redial / caller list: The redial / caller list contains the
last numbers dialled and the last calls received (
© indi-
cates the numbers dialled,
® the calls received and * the
calls missed).
1 Press @.
2 Select an entry using [.
Notice
Enlarge Detail
If you would like to copy a detail (such as a
graphic) of your document, position the
document so that the detail view is close
to the source . Using the zoom function,
you can separate the desired area from
rest of the document.
Notice
Adjust Scanner Cover
The scanner cover is equipped with adjust-
able hinges, allowing you to lay even
thicker documents (e.g. books) in the flat-
bed scanner. Carefully lift the scanner
cover so that it rests as evenly as possibly.
Use clear sheets of plastic when copying
three-dimensional objects (e.g. coins, flow-
ers) to avoid damaging the scanner glass.
CAUTION!
Do Not Press on the Scanner Cover!
Do not press forcefully on the scanner
cover when you scan thicker documents
or three-dimensional items, this could
damage the scanner cover and/or the scan-
ner glass.