Filter
Top Products
6-4 SV61162 Rev. C
6 • Adding Postage
Connecting
Your
Postage
Meter to
an Analog
Phone Line
1
Connecting Your Postage Meter - Local Analog Phone Line
If you are using an external modem and there is an analog phone line near
your mailing system, you should connect the modem to the USB connec-
tor on the back of the IntelliLInk® Control Center as shown in the figure
below.
If you need to connect to an analog phone line not near your machine, you
can connect the modem to the back of the IntelliLink® Control Center and
move it to the remote analog line. Refer to Connecting Your Postage Meter
- Remote Analog Phone Line in this section.
External modem
External USB
modem cable
Connecting Your Postage Meter - Remote Analog Phone
Line
If you need to connect to an analog phone line that is not located near
your mailing system, you can remove the IntelliLink® Control Center and
move it to a location near the analog phone line. At the remote location,
plug one end of the AC Adapter (P/N 1C85005) into the back of the control
center and the other end into an AC outlet.
To remove the IntelliLink® Control Center and move it to another location:
1. Turn off the power to the mail
-
ing system.
2. Pull the blue lever at the right of
the control center towards you.
3. Slide the control center forward
to remove it.