Pitney Bowes DM800 Postal Equipment User Manual


 
SV61162 Rev. C 9-17
DM800™ Series Digital Mailing System Operating Guide
Performing
Updates or
Adding
Features
This section describes how to:
Turn on new features.
Perform software updates and download new postal rates.
Add new advertisements and inscriptions.
Turn on New Features
If you purchase a particular feature before your system is delivered, your
Pitney Bowes representative will enter the feature code when installing
your system. If you purchase the feature after your system is installed, you
will be given the feature code when you purchase the feature.
1. Press the
Menu key on the IntelliLink® Control Center and select Turn
Features On.
2. The system prompts you to enter the numeric code of the feature you
want to enable.
3. Type in the code and press the
Enter key. The system notifies you that
the feature is now turned on.
Perform Software Updates
1. Press the Menu key.
2. Select Set Up and then press the down arrow key.
3. Select Updates and Add-Ons
.
4. Select
Check for Updates. The system connects to Pitney Bowes and
requests a list of updates.
5. If no updates are available, click
OK to exit this screen.
6. If updates are available, select the appropriate update and follow the
prompts displayed on the screen.
Add new Advertisements or Inscriptions
1. Press the Menu key.
2. Select
Set Up and then press the down arrow key.
3. Select Updates and Add-Ons.
4. Select either
Advertisements or Inscriptions depending on which
one is appropriate.
5. If your system provides more than one way of adding or updating fea
-
tures, your system may prompt you to “Select Method of Update”. If
you see this prompt go to step 6, otherwise follow the prompts.