Filter
Top Products
5-26 SV61162 Rev. C
5 • Mailing System Setup
14
Configuring
the Optional
Barcode
Scanner
If you have an optional barcode scanner attached to your
DM800™ Series Digital Mailing System, you can configure it to scan in ac-
count names or account codes if you are using the optional Budget Man-
ager or Business Manager accounting systems.
NOTE 1: You cannot scan in account names using a barcode scanner if you are
using the Standard Accounting package provided with your system.
NOTE 2:You can use a barcode scanner to scan in barcodes for electronic con-
firmation services regardless of the accounting system you are using. Electronic
confirmation services do not require any set up operations here.
Refer to the appropriate topic in this section:
• If you are using an accounting system on your DM800™ Series Digital
Mailing System you can set the default scan type so that your system
recognizes your particular accounting application when it scans the
barcode. Refer to Setting the Default Scan Type.
• If you are attempting to scan barcodes that were defined for other ac
-
counting systems and those accounts contain a prefix, you can set up
your system to recognize that prefix when it scans in the barcode. Re-
fer to Adding Barcode Prefixes.
• If you need to combine multiple barcode scans into a single barcode,
refer to Combining Barcodes.
• If you want your system to require an operator to press the
Enter key
to accept each barcode value after it is scanned and displayed on the
IntelliLink® Control Center screen, refer to Setting Auto-Enter.