Pitney Bowes DM800 Postal Equipment User Manual


 
4-12 SV61162 Rev. C
4 • Running Mail
Mode Selection: Weigh First Piece
This feature is available only on DM800™ Digital Mailing Systems that
have the optional WEIGH-ON-THE-WAY™ (WOW™) module installed.
In this mode, the machine weighs the first mail piece and processes the
remaining mail at the same postage rate.
WARNING! Do not lean on or disturb the system while it is
processing mail in this mode. It will affect the amount of postage
applied to the mail piece.
To run mail in this mode:
1. Press the
Mode key.
2. Select Weight First Piece
.
3. Press the
Class key if required and select the class. For more informa-
tion, refer to
5
Selecting a Class, Carrier or Special Service in this
chapter.
NOTE: If the weight you enter is invalid for the class, you are prompted to
select another class.
4. Press the Seal key and select your sealing option.
5. Place the stack of mail on the feed deck.
6. Press the
Start key.
7. If you are using the optional DJPS/DMPS Power Stacker, we recom
-
mend you remove your mail in manageable stacks and not allow the
deck to fill completely. The system will halt the stacker if it is filled to its
maximum capacity.