Filter
Top Products
SV61162 Rev. C 6-5
DM800™ Series Digital Mailing System Operating Guide
4. Take the control center (and external modem) to where the analog
phone line is.
5. Connect the telephone cord (AWG 26 or smaller) from the external mo-
dem to the analog telephone line.
6. Connect the A/C Adapter (P/N 1C85005) to the back of the control cen-
ter and plug it into an AC outlet. Refer to the figure below.
External USB
Modem Cable
External Modem
Telephone
Cord for
Analog Line
(26 AWG)
AC Adapter plugged into
IntelliLink® Control Center
6. Add or check your postage funds as described in Checking Your Post-
age By Phone Account Balance in this chapter.
7. Reinstall the IntelliLink® Control Center by sliding it into the docking
station on top of the mailing system until you hear it click into place.
8. Turn the power back on.