Filter
Top Products
SV61162 Rev. C 4-15
DM800™ Series Digital Mailing System Operating Guide
Mode Selection: Attached Scale
Use this option If the AutoScale feature is set to Off (see Set Up Scales/
Rates: AutoScale in Chapter 5 in this guide).
1. Press the
Mode key.
2. If the Attached Scale mode is not listed, select Weighing Options
.
3. Select
Attached Scale. The “Attached Scale Mode” screen appears.
4. Place the piece of mail on the scale.
CAUTION: Make sure you center the mail on the scale and
check to be sure it is not touching any other surface or object.
5. If the class displayed in this screen is incorrect, press the Class key
and select the class. For more information, refer to
5
Selecting a
Class, Carrier or Special Service in this chapter.
6. If this is a package, press the Tape key, otherwise go to step 7.
7. Place the piece of mail on the feed deck.
8. Press the
Start key.
9. If you are using the optional DJPS/DMPS Power Stacker, we recom
-
mend you remove your mail in manageable stacks and not allow the
deck to fill completely. The system will halt the stacker if it is filled to its
maximum capacity.