Filter
Top Products
4-14 SV61162 Rev. C
4 • Running Mail
. When you remove the last piece of mail from the scale, the system
asks you if you want to print postage. This is in case the last piece you
remove from the scale is the container for the mail.
7. If you are using the optional DJPS/DMPS Power Stacker, we recom
-
mend you remove your mail in manageable stacks and not allow the
deck to fill completely. The system will halt the stacker if it is filled to its
maximum capacity.
Selecting
the Postage
Mode and
Running
the Mail
continued
3
To perform manual weight entry:
1. Press the
Mode key.
2. Select Manual Weight Entry
.
3. Type in the number of pounds and press Enter.
If the weight of your mail is less than 1 lb, press the right arrow key to
go to the ounces field.
4. Type in the number of ounces and press
Enter.
5. Press the
Class key if required and select the class. For more informa-
tion, refer to
5
Selecting a Class, Carrier or Special Service in this
chapter.
NOTE: If the weight you enter is invalid for the class, you are prompted to
select another class.
6. If this is a package, press the Tape key, otherwise go to step 7.
7. Place the piece of mail on the feed deck.
8. Press the
Start key.
9. If you are using the optional DJPS/DMPS Power Stacker, we recom
-
mend you remove your mail in manageable stacks and not allow the
deck to fill completely. The system will halt the stacker if it is filled to its
maximum capacity.
Mode Selection: Manual Weight Entry