4-10 SV61162 Rev. C
4 • Running Mail
Selecting
the Postage
Mode and
Running
the Mail
Once you decide the appropriate mode
for running your mail job, you select the
mode on your mailing system. To ac-
cess the modes, press the Mode key
on the IntelliLink® Control Center.
The names of the modes as they ap-
pear on the screen are shown in the
menu on the left.
Depending on your model number, you
may have all or only some of these op-
tions.
For a detailed description of each
mode, refer to the specific mode topic
in this section. Follow the steps for your
mode exactly.
3
While your mailing system processes the mail, the screen:
• displays the status of the current job,
• instructs you, if necessary:
- to insert an envelope
- to turn off the mailing system
• keeps a running count of processed mail, and
• displays errors, at which point the machine stops immediately.
Mode Selection: Key in Postage
Use this mode if you know what the correct amount of postage is for your
mail and you intend to apply this postage to each piece.
1. Press the
Mode key.
2. Select Key In Postage.
3. Key in the correct postage value using the numeric keys on the
IntelliLink® Control Center, then press the
Enter key.
If you are done, place the mail on the feed deck and press the
Start
key, otherwise go to step 4.
4. If you want to change the date, add or change an advertisement or
inscription, press the Menu key and select Meter Stamp Options.
For more information, refer to
Selecting Meter Stamp Options in
this chapter.
5. When finished, place the stack of mail on the feed deck and press the
Start key.
6. If you are using the optional DJPS/DMPS Power Stacker, we recom
-
mend you remove your mail in manageable stacks and not allow the
deck to fill completely. The system will halt the stacker if it is filled to its
maximum capacity.
6
Select Mode
► Key in Postage
► WOW - Weigh on the Way
► Weigh First Piece
► Differential Weighing
► Manual Weight Entry
► Attached Scale
► Attached Scale - AutoTape
► Print Permit
► Seal Only - No Printing