Filter
Top Products
4-6 SV61162 Rev. C
4 • Running Mail
If you intend to run pieces of mai through your system, read About Run-
ning Mail below. If you are going to print postage tapes, read About Print-
ing Postage Tapes on the following page.
Then, proceed to instructions for selecting the mode and running the job.
About Running Mail
Refer to Appendix C, Specifications in this guide to make sure your mail
is compatible with your mailing system. For tips on feeding light weight or
bulky pieces of mail, flats and postcards, or any mail that is easily dam-
aged, refer to Tips on Feeding Mail in this section.
2
Preparing
Your Mail
1. Sort the mail by envelope size. If you are using the accounting feature,
sort by account as well.
2. Shingle the envelopes so
they are slanted slightly to the
left as shown in the picture on
the right.
3. Place the stack of mail on the feed deck shown in the picture below.
• Place the envelopes with the flaps down and against the rear wall.
• Make sure the envelopes are pushed far enough so that they cover
the feed sensor on the rear wall.
Envelopes shingled to the left
Feed sensor
Side guide