Filter
Top Products
SV61162 Rev. C 4-31
DM800™ Series Digital Mailing System Operating Guide
Changing the Date
1. If you are printing the date correction on an envelope and if the enve-
lope is sealed, press the Seal key and select Sealer Off. If you are
printing on a tape, go to step 3.
2. Turn the piece of mail around 180 degrees so that the meter stamp is
in the lower left corner as shown here. Then, place the envelope on
the feed deck with the flap facing down.
3. Press the
Mode key and select Key In Postage.
4. Enter the 00.00 for the postage value using the numeric keys and
press Enter.
5. Press the
Menu key and then select Meter Stamp Options.
6. Select the
Date option and make the appropriate selection.
7. Follow the prompts on the main screen. Press
Enter when complete.
8. Press the
Start key.
If you are printing a tape, press the Tape key.
9. The date correction prints on the envelope as shown here:
10. If you print a tape, apply the tape to the envelope below the existing
meter stamp.
0030
0037
0037
00 00
JULY 03,2002
00 37
8
Adding
Postage or
Changing
the Date
continued