Filter
Top Products
5-6 SV61162 Rev. C
5 • Mailing System Setup
Setting Up a
Supervisor
Password
4
You can limit access to the following operations by creating a supervisor
password.
• Adding Postage (Refill)
• Clearing Batch Information (the number of pieces of mail your system
processes)
• Setting up Scale/Rates
• Accounting Setup
Whenever you perform any of these operations, the system prompts you
for the password.
To create a supervisor password:
1. Press the Menu key.
2. Select
Set Up, then select Basic Settings.
3. Select
Supervisor Set Up. Enter the current password if prompted.
4. Select Edit (or Add) Supervisor Password
to create or change an
existing password. The system prompts you to enter the password and
then confirm it.
NOTE: Passwords are case-sensitive and must be at least 4 characters or
digits long.
To password protect an operation:
1. Press the Menu key.
2. Select
Set Up, then select Basic Settings.
3. Press the down arrow and select
Supervisor Set Up.
4. Select the option that corresponds to the operation you want to pass
-
word protect. The options are:
a.) Refill - select this to require a password for adding postage.
b.) Clear Batch - select this to require a password before you can
clear the batch count information from the system. The batch count
corresponds to the number of pieces of mail processed by the sys-
tem.
c.) Scale/Rates Setup - select this to require a password before you
can modify any of the Scale/Rates features.
d.) Accounting Setup - select this to password protect account edit-
ing and setup.