Filter
Top Products
59048-02 A 1-1
Section 1
Introduction
This manual describes the switch management tools which include the SANbox®
Manager application (version 2.0) and the Command Line Interface (CLI) for the
SANbox2®-64 Fibre Channel switch (firmware version 2.0). The SANbox
Manager switch management application is the primary focus of this manual
which is organized as follows:
Section 1 describes the intended audience for this manual, related
materials, and technical support.
Section 2 describes how to use SANbox Manager, its menus, and its
displays.
Section 3 describes fabric management tasks.
Section 4 describes switch management tasks.
Section 5 describes I/O blade management tasks.
Section 6 describes port and device management tasks.
Appendix A describes the Telnet command line interface.
Appendix B describes the optional performance monitoring application,
Fabric View.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
1.2
Related Materials
Refer to the following manuals for information about switch hardware and
installation.
SANbox2-64 Fibre Channel Switch Installation Guide, publication number
59043-02.