Filter
Top Products
A – Command Line Interface
Set Config Command
59048-02 A A-33
Q
ISLSecurity E_Port security. Determines which
switches a port will establish a link with.
Any - link with any FC-SW-2 compliant
switch. This is the default.
Ours - link only with an FC-SW-2
compliant QLogic switch.
None - reject the link.
SymbolicPortName Descriptive name. The default is Port.
ALFairness Arbitration loop fairness. Enables (True) or
disables (False) the switch’s priority to
arbitrate on the loop. The default is False.
DeviceScanEnabled Enables (True) or disables (False) the
scanning of the connected device for FC-4
descriptor information during login. The
default is True.
ForceOfflineRSCN Enables (False) or disables (True) the
immediate transmission of RSCN
messages when communication between
a port and its device is interrupted. If
enabled, the RSCN message is queued
for 200 ms. The default is False. This
parameter is ignored if IOStreamGuard is
enabled.
ARB_FF Send ARB_FF (True) instead of IDLEs
(False) on the loop. The default is False.
InteropCredit Interoperability credit. The number of
buffer-to-buffer credits per port. 0 means
the default (12) is unchanged.
ExtCredit Extended credits. The number of port
buffer credits that this port can acquire
from donor ports. The default is 0.
FANEnable Fabric address notification. Enables (True)
or disables (False) the communication of
the FL_Port address, port name, and node
name to the logged-in NL_Port. The
default is True.
Table A-9. Set Config Port Parameters (Continued)
Parameter Description