Filter
Top Products
2 – Using SANbox Manager
Setting SANbox Manager Preferences
59048-02 A 2-11
Q
2.7
Setting SANbox Manager Preferences
Using the preferences settings, you can:
Change the location of the working directory in which to save files
Change the location of the browser used to view the online help.
Choose the fabric discovery interval. The fabric discovery interval is how
often the SANbox Manager application receives information from the fabric.
Choose 30, 45, or 60 seconds.
Enable or disable the default view file auto save and load feature. Refer to
”Exiting SANbox Manager” on page 2-8 for more information on the default
fabric view file.
Enable or disable the use of the Initial Start Dialog at the beginning of a
SANbox Manager session. Refer to ”Starting SANbox Manager” on page 2-6
for information about the Initial Start Dialog.
Enable or disable the Event Browser. Refer to ”Displaying the Event
Browser” on page 3-9.
Choose the default port view when opening the faceplate display. You can
set the faceplate to reflect the current port mode, port speed, port
operational state, or port transceiver media. Refer to the corresponding
subsection for more information:
”Displaying Port Modes” on page 6-2
”Displaying Port Operational States” on page 6-3
”Displaying Port Speeds” on page 6-3
”Displaying Transceiver Media Status” on page 6-4
Figure 2-6. Preferences Dialog – SANbox Manager