Q-Logic 59048-02 A Switch User Manual


 
3 – Managing Fabrics
Displaying Fabric Information
59048-02 A 3-11
Q
3.3.2.1
Filtering the Event Browser
Filtering the Event Browser enables you to display only those events that are of
interest based on the event severity, timestamp, source, type, and description. To
filter the Event Browser, open the Filter menu and select Filter Entries. This
opens the Filter Events dialog shown in Figure 3-3. The Event Browser displays
those events that meet the criteria in the Filter Events dialog.
Figure 3-3. Filter Events Dialog
You can filter the event browser in the following ways:
Severity – Check one or more of the corresponding check boxes to display
alarm events, critical events, warning events, normal events, or informative
events.
Date/Time – Check one or both of the From: and To: check boxes. Enter the
bounding timestamps (MM/dd/yyyy hh:mm:ss) to display only those events
that fall within those times.
Text – Check one or more of the corresponding check boxes and enter a text
string for event source, type, and description. The Event Browser displays
only those events that contain the specified text string in the Source, Type,
or Description columns.