A – Command Line Interface
Set Config Command
A-34 59048-02 A
Q
LCFEnable Link control frame preference routing.
Enables (True) or disables (False)
preferred routing of frames with R_CTL =
1100 (Class 2 responses). The default is
False. Enabling LCFEnable will disable
MFSEnable.
MFSEnable Multi-Frame Sequence bundling. Prevents
(True) or allows (False) the interleaving of
frames in a sequence. The default is True.
Enabling MFSEnable disables LCFEnable
and VIEnable.
MSEnable Management server enable. Enables
(True) or disables (False) management
server on this port. The default is True.
NoClose Loop circuit closure prevention. Enables
(True) or disables (False) the loop’s ability
to remain in the open state indefinitely.
True reduces the amount of arbitration on a
loop when there is only one device on the
loop. The default is False.
IOStreamGuard I/O Stream Guard. Enable (Enable) or
disables (Disable) the suppression of
RSCN messages. The default is Disable.
VIEnable Enables (True) or disables (False) VI
preference routing. The default is False.
Enabling VIEnable will disable
MFSEnable.
CheckAlps Enables (True) or disables (False) the
loop’s ability to close more often. Enable
only for TL_Ports that are having problems
with a specific device. The default is False.
Table A-9. Set Config Port Parameters (Continued)
Parameter Description