Q-Logic 59048-02 A Switch User Manual


 
59048-02 A Index-1
Index
A
access control list zone 3-15, 3-28
account name 3-1, 3-3, A-1, A-81
active
firmware 4-26
zone set 3-12, 3-16, 4-17
Active Zoneset data window 3-12
Admin authority 3-1, A-3
Admin command A-4
administrative state
blade 5-2, A-30
configured 4-16, 5-2, 6-10
current 4-16, 5-2, 6-10
I/O blade 5-2
port 6-10, A-45
switch 4-16, A-31
alarm
configuration 4-11, A-36
configuration display A-64
log A-30, A-50
alias
add members 3-29, A-5
copy A-5
create 3-28, A-5
delete A-5
delete members A-6
description 3-16
display list A-5
display members A-6
remove 3-29
rename A-6
Alias command A-5
Arbitrated Loop Physical Address A-45
archive configuration 4-23
authentication
trap 4-21
user 3-1
auto save
default fabric view file 2-11
graphing options B-4
zoning configuration 3-17
B
beacon A-30
blade
administrative state 5-2, A-30
configuration A-32
configuration display A-64
description 5-1
display A-50
insert 5-3
numbering 2-22
remove 5-4
replace 5-3
reset 5-3, A-25
selecting 2-23
test A-75
Blade Information data window 5-1
BootP boot method 4-20
broadcast 4-17, A-50
browser
location 2-11, B-4
requirement 2-1
C
CD-ROM drive 2-1
chassis status A-50, A-51
Command Line Interface A-1
command syntax A-2
commands A-3
Config command A-7
configuration
activate A-7
archive 4-23
backup A-7
copy A-7
delete A-7
edit A-7
list A-7
reset A-25