Filter
Top Products
2 – Using SANbox Manager
Exiting SANbox Manager
2-8 59048-02 A
Q
2.3
Exiting SANbox Manager
To exit a SANbox Manager application session, open the File menu and select
Exit. If you have made changes to the view, the Save Default Fabric File dialog,
shown in Figure 2-3, prompts you to save the view as the default fabric view file.
You may also enter a password with which to protect the default fabric view file,
but a password is not required. Refer to ”Changing the SANbox Manager Default
Fabric File Password” on page 2-10 for information about changing this password.
Choose one of the following:
Enter a password in the Default File Password field or leave it blank and
choose the Save View File button. This saves the current set of fabrics in
the default fabric view file in the working directory.
Choose the Exit Without Saving button to exit the application without
saving the current fabrics to the default fabric view file.
Choose the Cancel Exit button to cancel the exit operation.
Figure 2-3. Save Default Fabric File Dialog – SANbox Manager
In your next SANbox Manager session, the Load Default Fabric File dialog shown
in Figure 2-4 prompts you to load the default fabric view file and to specify its
password if there is one.
Figure 2-4. Load Default Fabric File Dialog – SANbox Manager
To prevent SANbox Manager from prompting you to load and save the default
fabric view file between SANbox Manager sessions, set the View File Auto Save
and Load preferences setting to Disable (Enable is the default). Refer to ”Setting
SANbox Manager Preferences” on page 2-11 for more information.