Filter
Top Products
Installing Printer Software in Windows
10
To verify your printer’s IP address or the MAC address, print a
Network Configuration page.
•To find a shared network printer (UNC Path), select
Shared
Printer [UNC]
and enter the shared name manually or find a
shared printer by clicking the
Browse
button.
NOTE
: If you cannot find your machine in network, please turn off the
firewall and click
Update
.
For Windows operating system, click
Start
→
Control Panel
and start
windows firewall, and set this option unactivated. For other operating
system, refer to its on-line guide.
TIP
: If you want to set a specific IP address on a specific network
printer, click the
Set IP Address
button. The Set IP Address window
appears. Do as follows:
a. Select a printer to be set with a specific IP address from the list.
b. Configure an IP address, subnet mask, and gateway for the printer
manually and click
Configure
to set the specific IP address for the
network printer.
• Click
Next
.
6
Select the components to be installed and click
Next
.
NOTE
: You can change the desired installation folder by clicking
[
Browse
].
7
Select the components to be installed. After selecting the
components, the following window appears. You can also change
the printer name, set the printer to be shared on the network, set
the printer as the default printer, and change the port name of each
printer. Click
Next
.
To install this software on a server, select the
Setting up this
printer on a server
checkbox.
8
After the installation is finished, a window appears asking you to
print a test page and to register yourself as a user of Samsung
Printers in order to receive information from Samsung. If you so
desire, select the corresponding checkbox(es) and click
Finish
.
Otherwise, just click
Finish
.
NOTE
: After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver. See “Reinstalling Printer Software”
on page 11.