Filter
Top Products
Advanced Printing
21
Printing on Both Sides of Paper
You can print on both sides of a paper; duplex. Before printing, decide
how you want your document oriented. You can only use this feature with
Letter, Legal, A4, US Folio, or Oficio sized paper.
The options are:
• Printer Setting, if you select this option, this feature is
determined by the setting you’ve made on the control panel of the
printer.
• None
• Long Edge, which is the conventional layout used in book
binding.
•
Short Edge
, which is the type often used with calendars.
• Reverse Duble-Sided Printing, allows you to select general
print order compare to duplex print order.
N
OTE
: Do not print on both sides of labels, transparencies, envelopes,
or thick paper. Paper jamming and damage to the printer may result.
1
To change the print settings from your software application, access
printer properties. “Printing a Document” on page 13.
2
From the
Basic
tab, select the paper orientation.
3
From the
Double-sided Printing
section, select the binding option
you want.
4
Click the
Paper
tab, select the
Size
,
Source
, and
Type
.
5
Click
OK
and print the document.
N
OTE
: If your printer does not have a duplex unit, you should complete
the printing job manually. The printer prints every other page of the
document first. After printing the first side of your job, the Printing Tip
window appears. Follow the on-screen instructions to complete the
printing job.
Long Edge
▲
Short Edge
▲
25
3
2
5
3
2
5
3
2
5
3
Change percentage of your document
You can change the size of a page’s content to appear larger or smaller
on the printed page.
1
To change the print settings from your software application, access
printer properties. See “Printing a Document” on page 13.
2
From the
Paper
tab.
3
Enter the scaling rate in the
Percentage
input box.
You can also click the up/down arrows to select the scaling rate.
4
Select the
Size
,
Source
, and
Type
in
Paper Options
.
5
Click
OK
and print the document.
Fitting Your Document to a Selected
Paper Size
This printer feature allows you to scale your print job to any selected
paper size regardless of the digital document size. This can be useful
when you want to check fine details on a small document.
1
To change the print settings from your software application, access
printer properties. See “Printing a Document” on page 13.
2
From the
Paper
tab.
3
Select the paper size you want from the
Fit to page
.
4
Select the
Size
,
Source
, and
Type
in
Paper Options
.
5
Click
OK
and print the document.
A