Samsung SCX-6545N All in One Printer User Manual


 
Introduction_24
SUPPLIED SOFTWARE
After you have set up your machine and connected it to your computer, you
must install the printer software. If you are a Windows or Macintosh OS,
install the software from the supplied CD and if you are a Linux OS user,
download the software from the Samsung website (www.samsung.com/
printer) and install.
PRINTER DRIVER FEATURES
Your printer drivers support the following standard features:
Paper orientation, size, source and media type selection
Number of copies
In addition, you can use various special printing features. The following
table shows a general overview of features supported by your printer
drivers:
Printer driver
OS CONTENTS
Windows Printer driver: Use this driver to take full
advantage of your printer’s features.
Postscript printer driver: Use the PostScript
driver to print documents with complex fonts and
graphics in the PS language.
Scanner driver: TWAIN and Windows Image
Acquisition (WIA) drivers are available for
scanning documents on your machine.
Smart Panel: This program allows you to monitor
the machine’s status and alerts you when an error
occurs during printing.
SmarThru Office
a
: This is the accompanying
Windows-based software for your multifunctional
machine.
Samsung Scan Manager
: This program allows you
to scan a document on your machine and save it to
a network-connected computer.
Direct Printing Utility: This program allows you
to print PDF files directly.
Samsung Network PC Fax: This program allows
you to send a fax from you computer.
SetIP
: Use this program to set your machine’s T
CP/
IP addresses. You can only use IPv4 setting for
SetIP.
a.Allows you to edit a scanned image in many ways using a powerful
image editor and to send the image by email. You can also open
another image editor program, like Adobe Photoshop, from SmarThru.
For details, please refer to the onscreen help supplied on the SmarThru
program.
Linux Postscript Printer Description (PPD) file: Use
this file to run your machine from a Linux
computer and print documents.
SANE: Use this driver to scan documents.
Smart Panel: This program allows you to monitor
the machine’s status and alerts you when an error
occurs during printing.
SetIP
: Use this program to set your machine’s T
CP/
IP addresses. You can only use IPv4 setting for
SetIP.
Macintosh Postscript Printer Description (PPD) file: Use
this file to run your machine from a Macintosh
computer and print documents.
Scanner driver: TWAIN driver is available for
scanning documents on your machine.
Smart Panel: This program allows you to monitor
the machine’s status and alerts you when an error
occurs during printing.
SetIP
: Use this program to set your machine’s T
CP/
IP addresses. You can only use IPv4 setting for
SetIP.
FEATURE
PCL 6 POSTSCRIPT
WINDOWS WINDOWS LINUX MACINTOSH
Toner save OOOO
Machine quality
option
OOOO
Poster printing OXXX
Multiple pages
per sheet (N-up)
OOO (2, 4)O
Fit to page
printing
OOOO
Scale printing OOOO
Different source
for first page
OXXO
Watermark OXXX
Overlay OXXX
Duplex
a
a.The machine with Duplex feature prints both side of a paper.
OOOO
Secu Print OOXO
Scheduled Print OOXO
Spool Print OOXO
Proof Print OOXX
Stapler OOOO