Filter
Top Products
8-24 SANRAD V-Switch CLI User Manual
You need to define one parameter to retract a volume:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-vol
VOLUME VOLUME TO
RETRACT
– HEAD
OF HIERARCHY
MANDATORY
Mir5
Expanding a Volume
If you are working in
a V-Switch cluster, a
volume must be
expanded on both V-
Switches.
You must expand a volume’s actual capacity, its capacity as identified by
the file server, to match its resized potential capacity using the CLI
command volume expand. If you do not expand the resized volume, its
resized capacity will not be available for storage use. After expanding a
volume, its host’s file server will show its new capacity but the disk
partition will not expand automatically. The host must expand the disk
partition.
In Figure 8-19, a concatenated volume is expanded from two terabytes to an
actual capacity of three terabytes to match its resized potential capacity of three
terabytes.
10196
LU0
Con
Ch 1 Ch 2
2T
1T
1T
Ch 3
1T
LU0
Ch 1 Ch 2
1T
1T
Ch 3
1T
Con
3T
Figure 8-19. Expanding a Concatenated Volume