Filter
Top Products
11-24 SANRAD V-Switch CLI User Manual
storage blink activate
This command allows you to blink a storage device to identify it.
storage blink activate
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-s
STORAGE DEVICE ALIAS OF DEVICE
TO BLINK
MANDATORY
Stor_1
-t
TIME LENGTH OF TIME TO
BLINK DEVICE
MANDATORY
1-3600
SEC
0=
FOREVER
120
storage blink abort
This command stops a storage device from blinking.
storage blink abort
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-s
STORAGE DEVICE ALAIS OF DEVICE
TO BLINK
MANDATORY
Stor_1
storage show
This command shows all storage devices connected to the V Switch.
storage show
Table 11-14: Storage Devices
Alias Entity Name LUN Oper. Status Type
Stor_1 0102030405060708 0 Disabled disk
Stor_2 090a0b0c0d0e0f10 0 Enabled entire
Stor_3 090a0b0c0d0e0f10 1 Enabled split
disk4 0102030405060708 0 Storage is
missing
entire
storage disk show
This command shows all storage disks connected to the V Switch.
storage disk show