Filter
Top Products
4-18 SANRAD V-Switch CLI User Manual
iSNS
The V-Switch supports Internet Storage Name Service (iSNS) protocol for
advertising its targets and portals on the iSNS server to enable iSCSI initiators
in the IP-SAN to locate the V-Switch targets automatically. Use the CLI
command ip isns add to add an iSCSI server to the V-Switch’s iSNS client.
Targets defined by the V-Switch’s Access Control List (ACL) as having
controlled access are accessible only to those servers defined as having access to
the target. See “Volume Exposure & Security”.
ip isns add
You need to define one parameter to add an iSNS server address:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
I
SNS SERVER
MANDATORY
212.199.43.1
Use the CLI command ip isns show to view all added iSCSI server
addresses.
ip isns show
Table 4-4: iSNS Servers
212.199.56.45
Deleting an iSNS Server
Use the CLI command ip isns remove to remove an iSNS server from the V-
Switch iSNS client.
ip isns remove
You need to define one parameter to remove an iSNS server address:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
I
SNS SERVER
MANDATORY
212.199.43.1