Filter
Top Products
Chapter 10: Routine V-Switch Maintenance 10-7
You need to define one parameter to remove an iSNS server address:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
I
SNS SERVER
MANDATORY
212.199.43.1
User Profiles
Access to the V-Switch is password protected. The V-Switch ships with
the default user name sanrad and the default user password sanrad. After
logging in, a total of ten user profiles (name plus password) can be
configured on a V-Switch. As needed, profiles can be modified or
removed.
The user name can have from one to twenty characters. The user password can
have from six to twelve characters. Both fields are case sensitive and accept all
characters, including spaces.
Adding a User Profile
All CLI names and
aliases are case
sensitive.
A total of ten user profiles can be configured on a V-Switch. Use the CLI
command admin add to add a user login profile
admin add
You must define two parameters to add a user profile:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-un
USER NAME USER NAME MANDATORY
Joe Cool
If you are working in
a V-Switch cluster, a
user profile must be
added on both V-
Switches.
-pw
PASSWORD USER PASSWORD MANDATORY
123456
Example:
admin add –un Joe Cool –pw 123456