Filter
Top Products
11-2 SANRAD V-Switch CLI User Manual
The CLI supports the use of the following hot keys for the listed functions:
Table 11-1: Hot Keys
Command Description
?
LIST OF COMMANDS WITH A SHORT DESCRIPTION OF EACH
!
RETURN TO MAIN MENU
Esc
ABORT CURRENT COMMAND
#
DISPLAY LAST COMMAND TO VIEW COMMAND HISTORY
Tab
COMPLETE A COMMAND TO THE POINT OF AMBIGUITY
V Switch Configuration
These commands enable you to configure and view the basic V Switch
parameters needed to operate the V Switch
COMMAND COMMAND COMMAND COMMAND
ADMIN SHOW FC SET SPEED IP ROUTE DEFAULT CLUSTER SET
ADMIN ADD INTERFACE SHOW IP ROUTE ADD CLUSTER FAILOVER
ENABLE
ADMIN REMOVE INTERFACE DETAILS IP ROUTE SHOW CLUSTER FAILOVER
DISABLE
ADMIN PASSWORD INTERFACE SET IP ROUTE REMOVE FT SHOW
SYSTEM RESET PSCSI SHOW IP ISNS SHOW FT UPLOAD SOFTWARE
SYSTEM
RESET
_DEFAULT_FACTORY
PSCSI SET BUSID IP ISNS ADD FT DOWNLOAD
INFO SNMP MANAGER SHOW IP ISNS REMOVE FT EXPORT PROBLEM
DEVICE SET SNMP MANAGER ADD NEIGHBOR ADD SYSTEM BOOT
DEVICE SET -TELNET DEVICE SET NEIGHBOR SET SYSTEM SET
DEVICE ADVANCE SET SNMP MANAGER
REMOVE
NEIGHBOR SHOW SYSTEM COPY
DEVICE ADVANCE SHOW IP CONFIG SHOW NEIGHBOR DETAILS SYSTEM SHOW
FC INTERFACE SHOW IP CONFIG SET NEIGHBOR REMOVE
FC NODE SHOW IP CONFIG REMOVE CLUSTER SHOW