SANRAD I3.1.1205 Switch User Manual


 
2-8 SANRAD V-Switch CLI User Manual
The V-Switch 2000 supports two storage ports in any combinations of the
following:
Table 2-2: SCSI Storage Port Connection Type
SCSI CONNECTOR LENGTH
SCSI ULTRA3 LVD 160MB/SEC 68 PIN PORT UP TO 12M
10211
FC Storage
Ports
Figure 2-7. V-Switch 2000 FC Storage Ports
Table 2-3: FC Storage Port Connection Types
FIBRE CHANNEL 1 GBIT/2 GBIT NL_PORT OR
N_PORT OF EITHER
L
ENGTH SFP
SHORT-WAVE LASER FOR MULTIMODE
FIBER
U
P TO 550M SHORT-WAVE SFP
LONG-WAVE LASER FOR SINGLE-MODE
FIBER
U
P TO 10KM LONG-WAVE SFP
Your exact port
configuration will
depend on your V-
Switch 2000 order
specifications.
COPPER (1 GBIT) UP TO 25M
When connecting more than one V-Switch 2000 to a group of storage devices,
ensure that the same port on each V-Switch 2000 is used to connect to the same
storage device. This increases the chance of the storage device receiving the
same default storage number on both V-Switches during their auto-discovery
cycles. This, in turn, makes cluster configuration easier.
There are two FC storage port LEDs labeled lnk, one to the left of each storage
port.