Filter
Top Products
4-8 SANRAD V-Switch CLI User Manual
Example:
The V-Switch alias is reset to V-Switch 1; the IP address for V-Switch
management functions is changed to 212.199.43.47. The date is set to the 21
st
of
July, 2002 and the time to 1:30 p.m. Anna Levin is named as the contact person
and she can be reached at the internal office extension 4838.
device set –n VSwitch1 –ip 212.199.43.47 –d 21/07/2002 –t
13:30 –c AnnaLevin –loc ext4838
You can now connect to the V-Switch 1 Gb Ethernet port or 10/100Mb
management port and begin managing the V-Switch operations and the
attached SAN.
Checking the V-Switch Configurations
After setting the general V-Switch Management configurations, you can use the
CLI command info to access the V-Switch Configuration table and view the
current configuration, including whom to contact in the event of technical
difficulties.
info
Table 4-1: V-Switch Configuration
Parameter Value
Name VSwitch1
Description SW Version 2.0, build 4,patch 0
Board version 1, PCB version 0
ID -1
Contact Anna Levin
Location Ext. 4838
Status OK
Object ID 1.3.6.1.4.1 10059 1.1.2
Time Since Last Reset 12 days 17 hours 29 min 32 sec
Mgmt IP Address 212.199.43.47
Mgmt UDP Port 161
Date & Time [DD/MM/YY] 21/04/02 13:33
Telnet Port 23
Eth Up
FC Up
Read Community Public
Write Community Private