Filter
Top Products
10-2 SANRAD V-Switch CLI User Manual
General Configuration Parameters
This command is
available only after
the V-Switch is
initialized with the init
command.
After the initial V-Switch configuration, you may want to change one or
more of the V-Switch parameters. For example: You may need to change
the system clock to adjust to Daylight Savings Time. You can also use this
command to add contact information of whom to contact in the event of
technical difficulties.
device set
You can define or change thirteen parameters using this command:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
If you are working in
a V-Switch cluster,
the changes must be
configured in both V-
Switches.
-n
NAME USER-ASSIGNED
NAME FOR THE
V-
S
WITCH
OPTIONAL
VSwitch1
-ip
MANAGEMENT IP
ADDRESS
IP
ADDRESS OF THE
MANAGEMENT PORT
OPTIONAL
212.199.43.47
-im
MANAGEMENT IP
MASK
IP
MASK FOR THE
MANAGEMENT PORT
OPTIONAL
DEFAULT:
255.255.255.0
-p
UDP PORT PORT THROUGH
WHICH ALL
UDP
COMMUNICATIONS
WILL FLOW
–
NAMELY FOR
SNMP
OPTIONAL
DEFAULT: 161
-if
INTERFACE ALIAS ALIAS OF PORT FOR
MANAGING
V-
S
WITCH
OPTIONAL
DEFAULT: MGMT
(ETH1 OR
MGMT
)
-d
DATE LOCAL DATE OPTIONAL
21/07/2002
-t
TIME LOCAL TIME OPTIONAL
13:30
-c
CONTACT CONTACT PERSON
IN THE EVENT OF A
SYSTEM
MALFUNCTION
OPTIONAL
AnnaLevin
-loc
LOCATION LOCATION OF THE
CONTACT PERSON
OPTIONAL
ext4838