Filter
Top Products
Chapter 4: V-Switch Configuration 4-11
Adding User Login Profiles
All CLI names and
aliases are case
sensitive.
After logging in to a V-Switch, a total of ten user profiles (name plus
password) can be configured on a V-Switch using the CLI command
admin add. The default user name and password sanrad can be
maintained or removed. The user name can have from one to twenty
characters. The user password can have from six to twelve characters.
Both fields are case sensitive and accept all characters, including spaces.
Example
admin add
You need to define two parameters to configure a user profile:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-un
USER NAME USER NAME MANDATORY
Joe Cool
-pw
PASSWORD USER PASSWORD MANDATORY
6
CHARACTER
MINIMUM
123456
Example
admin add –un Joe Cool –pw 123456
For information on changing or removing user profiles, please see “User
Profiles”.
Configuring the Storage Ports
If your V-Switch configuration contains SCSI devices, you can set the storage
port bus ID. If your V-Switch configuration contains FC storage ports, you can
change the default configuration of each port. Use the CLI command
interface show to show all storage port connections.