Filter
Top Products
11-6 SANRAD V-Switch CLI User Manual
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-t
TIME LOCAL TIME OPTIONAL
13:30
-c
CONTACT CONTACT PERSON
IN THE EVENT OF A
SYSTEM
MALFUNCTION
OPTIONAL
AnnaLevin
-loc
LOCATION LOCATION OF THE
CONTACT PERSON
OPTIONAL
ext4838
-if
MANAGEMENT
INTERFACE ALIAS
MANAGEMENT PORT
NAME
MANDATORY
ETH1
eth1
-rld
REPORT LUN
DISCOVERY
MODE FOR
DISCOVERING
DEVICE
LUNS
MANDATORY
YES OR NO
DEFAULT: YES
no
-telnet
TELNET PORT PORT FOR V-
S
WITCH
COMMUNICATIONS
OPTIONAL
DEFAULT: 23
1597
-rcom
READ
COMMUNITY
COMMUNITY TO
GET INFORMATION
OPTIONAL
DEFAULT:
PUBLIC
-wcom
WRITE
COMMUNITY
COMMUNITY TO SET
INFORMATION
OPTIONAL
DEFAULT:
PRIVATE
-
temperature_units
TEMPERATURE
SCALE TO DISPLAY
HARDWARE
TEMPERATURES IN
:
CELSIUS OR
FAHRENHEIT
OPTIONAL
C OR F
DEFAULT:
CELSIUS
Example
device set –n VSwitch1 –ip 212.199.43.46 –d 21/04/2002 –t
13:30 –c AnnaLevin. –loc ext4838 –if eth1 –rld no
device set -telnet
This command changes the Telnet port from the default port number to a user
defined port number. Establishing a Telnet connection on an alternate port (not
the expected port 23) provides increased line security.
device set -telnet
Example