Filter
Top Products
A-28 SANRAD V-Switch User Manual
Figure A-16. V-Switch 3000 Login Screen
Enter the default user name, sanrad, and password, sanrad, and press
Enter on your keyboard. The CLI prompt > appears. You are now
logged in and ready to begin configuring your V-Switch for volume
virtualization and exposure.
STEP 7. NAME V-SWITCH 1
Use the CLI command init to name V-Switch 1. You will need this name
later for exposing volumes.
init –n VSwitch1
STEP 8. L
OGIN TO THE V-SWITCH 2 MANAGEMENT PORT
From your management terminal, open another Telnet session, this time
with the management port on V-Switch 2.
From the Windows Start menu, select Run.
In the Open window, enter:
telnet 212.199.43.42
Click OK. A Telnet session window opens.
Press Enter on your keyboard to open the V-Switch 3000 Login window.