Filter
Top Products
10-6 SANRAD V-Switch CLI User Manual
Removing an SNMP Manager
This command removes a manager from the V-Switch.
snmp manager remove
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS MANAGER IP
ADDRESS
MANDATORY
212.199.43.96
-p
UDP PORT PORT TO RECEIVE
TRAPS THROUGH
MANDATORY
162
iSNS Server
The V-Switch supports Internet Storage Name Service (iSNS) protocol for
advertising its targets and portals on the iSNS server to enable iSCSI initiators
in the IP-SAN to locate the V-Switch targets automatically.
Adding an iSNS Server
Use the CLI command ip isns add to add an iSCSI server to the V-Switch’s
iSNS client. Targets defined by the V-Switch’s Access Control List (ACL) as
having controlled access are accessible only to those servers defined as having
access to the target
ip isns add
You need to define one parameter to add an iSNS server address:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
I
SNS SERVER
MANDATORY
212.199.43.1
Removing an iSNS Server
Use the CLI command ip isns remove to remove an iSNS server from the V-
Switch iSNS client.
ip isns remove