Filter
Top Products
Chapter 9: Routine Volume Maintenance 9-7
Removing an iSCSI Target
If you are working in
a V-Switch cluster,
the target must be
removed on both V-
Switches.
You can remove an iSCSI target provided it has no attached LU. Use the
CLI command lu remove to first remove any LUs from a target.
iscsi target remove
You need to define one parameter to remove an iSCSI target:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ta
TARGET ALIAS ALIAS OF ISCSI
TARGET TO REMOVE
MANDATORY
musicbox
Example:
iscsi target remove –ta musicbox
Removing a RADIUS Server
Use the CLI command ip radius remove to remove a RADUIS server from
the V-Switch.
ip radius remove
You need to define one parameter to remove an iSNS server address:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
RADIUS SERVER
MANDATORY
212.199.43.1
-p
PORT UDP PORT FOR
SENDING REQUESTS
TO
RADIUS
SERVER
MANDATORY
1812
Removing an iSNS Server
Use the CLI command ip isns remove to remove an iSNS server from the
V-Switch iSNS client.
ip isns remove
You need to define one parameter to remove an iSNS server address:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
I
SNS SERVER
MANDATORY
212.199.43.1