Filter
Top Products
2-68
Section 2 — Startup & Configuration
Operating the Model 3000 With a DPM-700
This feature allows you to return a high tally from a DPM-700
when configured with the Model 3000. To use the DPM Logical
Channel Tally feature, connect the DPM-700 as described in the
Installation and Service manual.
To Enable the Model 3000
1. From the Map Inputs Menu:
a. Select LOG CHANNEL with the LOG/PHYS ASSIGN button.
b. Select DPM 1 LOG CHAN 1 with the VIDEO INPUT soft knob.
c. Select DPM 1 LOG CHAN 1 with the KEY INPUT soft knob.
d. Select NONE with the CHROMA KEY INPUT soft knob.
2. From the DPM Setup Menu:
a. Choose DPM 1 with the DEVICE SELECT button.
b. Choose OTHER FIXED with the DPM TYPE button.
3. From the DPM Map Aux Buses Menu:
a. Select DPM 1.
b. Select 2 with the NUMBER OF CHANNELS soft knob.
c. Select AUX 1 with the CHANNEL 1 soft knob.