Filter
Top Products
2-57
Setting User Preferences
2. From the Keyer Preferences Menu, press CLEAR KEY MEM> to
bring up the Clear Key Memory Menu.
This menu allows you to clear the key memory settings for
selected areas of the switcher.
3. With the SECTION SELECT and BUS SELECT buttons, select
the area of the switcher whose key memory you wish to clear.
To select a specific crosspoint on a bus: After selecting the
section and bus, press the specific crosspoint on the selected
bus. (The number of that crosspoint will appear in the
CURRENT XPT box in the menu.)
4. Use the CLEAR XPT, CLEAR BUS, CLEAR SECTION, or CLEAR
SWITCHER
button to clear the desired memory area.
5. Press EXIT to return to the User Preferences Menu.
CLEAR KEY MEMORY MENU
config / user prefs / keyer prefs / clear key mem
BUS
SELECT
CURRENT
XPT
SECTION
SELECT
CLEAR
XPT
CLEAR
SECTION
CLEAR
BUS
CLEAR
SWITCHER
M/E 2
M/E 3
DSK
AUX
MASK
B
KEY 1
KEY 2
7
Press a button below to clear key memory for –
CLEAR XPT: the current xpt on the selected bus
CLEAR BUS: all xpts on the selected bus
CLEAR SECTION: all xpts on all buses in the selected section
CLEAR SWITCHER: all xpts in the switcher
M/E 1
A