Filter
Top Products
4-43
E-MEM (Effects Memory) Operations
Do not use the following functions. Set them as indicated:
■ SEP HUE SUPPRESS – set to OFF
■ CORING – set to FIXED
E-MEM (Effects Memory) Operations
The switcher’s E-MEM
Effects Memory System includes 100
internal storage registers that you can use to store (learn), recall,
and modify switcher panel setups. There are ten “banks” with ten
registers in each bank. Switcher panel setup data saved in E-MEM
registers can be recalled at a later time. The setups may also be
saved and recalled from floppy disk (refer to Floppy Disk Drive
Operations on page 4-77). The memory containing stored setups
is protected against power outages, so if switcher power is lost,
E-MEM register data will remain intact. The following E-MEM
topics are discussed:
■ Normal or 300-Style Learn or Recall Mode – Version 5.1 and
later
■ Basic E-MEM
■ Enables
■ Storing
■ Recalling
■ Effects Dissolves
■ Sequencing
NOTE:
See Floppy Disk Drive Operations on page 4-77 for how to
save and recall E-MEM files to and from the floppy disk drive.