Filter
Top Products
2-21
Configuring Inputs
8. Select each character by turning the soft knobs located to the
right of the Menu Display.
9. Enter the selected character by pressing the ACCEPT CHAR
button. The new character will be displayed in the menu.
10. Continue selecting characters in this manner until the desired
name is spelled out in the menu. You may enter up to 9
characters for the input name.
NOTE:
For a 3000-3 with the Input Readout Display option, only the
first 4 characters of the name will be displayed.
11. Press ACCEPT NAME to store the source name.
12. Repeat steps 3 through 11 until all inputs have been mapped
and named.
Press EXIT until the Inputs Menu reappears.