Filter
Top Products
2 Troubleshooting Procedures 2.14 Wireless LAN Troubleshooting
2.14 Wireless LAN Troubleshooting
This section describes how to determine if the computer's Wireless LAN is functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Transmitting-Receiving Check
Procedure 2: Antennas' Connection Check
Procedure 3: Antenna Check
Procedure 4: Replacement Check
Procedure 1 Transmitting-Receiving Check
Make sure the wireless communication switch on the left side of the computer is turned ON. If
it is not, slide the switch toward the back of the computer to turn it on.
Check 1 Execute test program to check the transmitting-receiving function of the wireless
LAN. You will need a second computer that can communicate by the wireless
LAN. Perform the test following the instructions described in section 3.18
Wireless LAN test program.
If the computer passes the test, the function is correctly working.
If the computer does not pass the test, perform Procedure 2.
2-56 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)