Filter
Top Products
4 Replacement Procedures 4.2 Battery Pack/PC Card
Installing the battery pack
The following describes the procedure for reinstalling the battery pack (See Figure 4-1, 4-2).
CAUTION: There is a danger that the lithium ion battery pack may explode if not fitted,
operated, handled, or disposed correctly. Collect the spent battery packs. Use only the
batteries approved by Toshiba.
NOTE: Check visually the battery terminals and clean off any dirt with a dry cloth.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Check that the battery lock is in the open position.
Insert the battery cover on the computer from the connector side and press the battery
cover to secure.
4. Slide the battery lock into the lock position.
4-10 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)