Filter
Top Products
4 Replacement Procedures 4.2 Battery Pack/PC Card
4.2 Battery Pack/PC Card
4.2.1 Battery Pack
Removing the battery pack
The following describes the procedure for removing the battery pack (See Figure 4-1, 4-2).
CAUTION: Take care not to short circuit the terminals when removing the battery pack.
Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery
pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Turn the computer upside down.
4. Slide the battery lock in the direction indicated by the arrow and open the lock.
5. Slide the battery latch towards the direction indicated by the arrow. Insert you finger
into the slot and lift up the battery cover.
Battery Cover
Battery Latch
Battery Lock
Slot
Figure 4-1 Removing Battery Cover
4-8 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)