Filter
Top Products
3.25 Floppy Disk Drive Utilities 3 and Diagnostics
3. COPY program
(a) When COPY is selected, the following message appears:
FLOPPY DISK FORMAT & COPY : VX.XX
Type select (0:2DD,3:2HD) ?
(b) Select a drive type number. Selecting 3:2HD will display a message similar to
the one below. Select a media type number.
2HD media mode (1:1.20MB, 2:1.44MB)
(c) The following message will appear:
Insert source disk into drive A:
Press any key when ready.
(c) Remove the Diagnostics Disk from the FDD, insert the source disk and press
any key. The following message will appear, indicating the program has
started.
[ FD TYPE ] : TRACK = XXX
[ FD TYPE ] : HEAD = X
[ FD TYPE ] : SECTOR = XX
Copy start
[[ track,head = XXX X ]]
(d) Remove the source disk from the FDD, insert a formatted work disk and press
any key. The following message will appear and start copying to the target
disk.
Insert target disk into drive A:
Press any key when ready.
[[ track,head = XXX X ]]
(e) When the amount of data is too large to be copied in one operation, the
message from step (c) is displayed again. After the floppy disk has been
copied, the following message will appear:
Copy complete
Another copy (1:Yes/2:No) ?
(f) To copy another disk, type 1 and the message from step (a) is displayed again.
Entering 2 returns the test program to the DIAGNOSTIC MENU.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 3-63