Filter
Top Products
4.18 Fluorescent Lamp 4 Replacement Procedures
8. Install the bezel (E) on the lamp cover and hook the four latches on the lamp cover
and two latches on the P-chassis.
(E) Bezel
(2) Lean the bezel on the lamp cover
without interference with the TCP.
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
< Side view >
Hook
(Lamp cover side)
Figure 4-126 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (20)
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating of the bezel and the latch o
f
the P-chassis.
Make sure of mating of the bezel
and the latch of the P-chassis.
Figure 4-127 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (21)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-125