Filter
Top Products
3 Tests and Diagnostics 3.17 Sound/LAN/Modem Test
3.17 Sound/LAN/Modem Test
To execute the Sound/LAN/Modem Test, use the Diagnostics disk (No.2). Finish the tests of
the Diagnostics disk (No.1) by selecting 99 - EXIT TO DIAGNOSTICS MENU in the
DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS MENU, select 9 - EXIT TO MS-
DOS.
Insert the Diagnostics disk (No.2) in the floppy disk drive and turn on the power while
pressing F or U (when the USB FDD is used). The following message will appear:
###################################################################
####### XXXXXX DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST)########
###################################################################
* 1 ………………………… (Microphoned recording&play) *
* *
* 2 ………………………… (Sin wave) *
* *
* 3 ………………………… (LAN) *
* *
* 4 ………………………… (MODEM) *
*******************************************************************
.. Press test number[1-4] ?
Press the number you want to test and press Enter.
NOTE: To execute Subtest 01, the external microphone and headphone are required. The
system is capable of producing high volume sound, so when you use the headphones
be careful to set the volume low and adjust it as necessary. Using the headphones at
full volume could damage your ears.
To execute a subtest continuously, select the test number and press Enter. To exit the
Sound/LAN/Modem test, remove the test program disk from the FDD (or the USB FDD) and
turn off the power.
3-38 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)