Filter
Top Products
4.18 Fluorescent Lamp 4 Replacement Procedures
4.18.4 Replacing the 14.1 Inch XGA Samsung Fluorescent Lamp (VF2048P01)
The following describes the procedure for replacing the fluorescent lamp (See Figure 4-72 to
Figure 4-81).
1. Remove the PCB cover (Cover-PCB), tape fixing the FL cable (Tape-Wire) and the
aluminum tape (Tape-Al).
1) When removing the PCB cover, be careful not to damage the driver IC on the PCB.
2) Remove the aluminum tape.
3) Remove the tape fixing the FL cable.
Figure 4-72 Replacing 14.1 Inch Samsung fluorescent lamp (VF2048P01) (1)
10. Remove the five screws from the top chassis (VF2048P15:M2x2.5).
Figure 4-73 Replacing 14.1 Inch Samsung fluorescent lamp (VF2048P01) (2)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-87