Filter
Top Products
4 Replacement Procedures 4.18 Fluorescent Lamp
3. Remove the source PCB and gate PCB.
1) Remove the source PCB. Be careful not to apply excessive force to the PCB or
TCP when removing the double-sided tape.
2) Remove the gate PCB. Be careful not to apply excessive force to the PCB or
TCP when removing the double-sided tape.
Source PCB
Gate PCB
Figure 4-92 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (3)
4. Remove the board assembly, adhesive tape, light guide and cover assembly bottom
(L).
1) Remove the board assembly.
2) Remove the adhesive tape securing the sheets (four points).
3) Remove the sheets and light guide.
NOTE: No penetration of foreign object is indispensable not to scratch the
sheets.
4) Remove the screw and cover assembly bottom (L).
NOTE: Maximum value of torque is 1.5kg
•
cm.
4-102 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)