Filter
Top Products
06_ContScanPlacing.fm Modified: 8/7/02
Template Version 1.0
GL-1020 Scan Operator’s Guide 37
INTRODUCTION
To scan a document, you must place the originals either in the
Automatic Document Feeder (ADF) or on the glass. Then use
either the Public Scan feature or the Private Scan feature as
appropriate.
PLACING THE ORIGINALS
This section outlines how to place documents for scanning.
Using the Automatic Document Feeder
Using the Automatic Document Feeder
Note: Remove any paper clips or staples from the originals
before placing them on the feed tray.
1 Align the edges of the originals. Set the originals face up on
the feed tray, then align the sliders to the edges of the
originals.
The maximum size of a scan job is 1 GB, but may be less
depending on the available memory in the controller and the
available free space on its hard disk.
The maximum number of originals you can scan at one time
is 100 sheets (200 images if you are using duplex mode).