Filter
Top Products
07_ScanErrorMessages.fm Modified: 8/7/02
Template Version 1.0
72 GL-1020 Scan Operator’s Guide
Finish glass Scan (Max page reached) The number of pages has reached the
maximum (100 pages or 200 images if
duplex). Finish scanning.
Finish glass Scan (A document is on ADF) A document on the glass is being scanned.
Wait until the current scan process is complete
before using the ADF scan function.
Finish glass Scan (Job full) Finish scanning, reduce the resolution, or
change the document type to “Text” or “Text/
Photo,” to scan again.
Finish ADF Scan Place an original on the ADF.
100 sheets can be set on the ADF. To
continue, repeat the operation.
The number of sheets has reached the
maximum. Reduce the number of sheets to
scan again.
Job Overflow. To continue, repeat the
operation.
The amount of data has reached the
maximum for a scan.
Reduce the amount of data to scan again
using any of the following methods:
1. Reduce the number of pages.
2. Reduce the resolution.
3. Select Text/Photo or Text mode.
Job Overflow. Finish ADF scan. The amount of data has reached the
maximum for one scanning. Reduce the
amount of data to scan again using any of the
following methods:
1. Reduce the number of pages.
2. Reduce the resolution.
3. Select Text/Photo or Text mode.
When this error occurs during continuous
scanning, data scanned before the error
occurred is stored.
To use the stored data, press the Finish key.
Error Messages Defined
Message Action (End User)