Filter
Top Products
06_ScanDestinations.fm Modified: 8/7/02
Template Version 1.0
54 GL-1020 Scan Operator’s Guide
SCANNING DESTINATIONS
You can scan to six destinations.
Before you specify any template destination settings, the
administrator must configure the scan transfer agents, entering
details such as the SMTP Server IP Address and Controller
Domain Address. Please refer to the Administrator’s Guide or the
TopAccess Web-based help for details.
Scanning to TWAIN
Send to TWAIN saves image data in the \GL_TWAIN folder on
the controller.
At shipment, the domain name for the controller is
“WORKGROUP.”
The directory in which the file is stored follows this convention:
[\\GL<XXXXXXXXXXXX>] – [\GL_TWAIN]
where GL<XXXXXXXXXXXX> represents the Media Access
Control (MAC) address of the network interface card in the
controller.
To retrieve the data from a shared folder on the controller, use a
TWAIN-compliant application on your client workstation.
Scanning to File
Send to File saves image data either in the controller’s
\GL_SHARE folder or in a shared folder on the file server.
You can save scanned images in TIFF or PDF format and retrieve
them from the shared folder on the controller or file server via the
network.
Saving to the Controller
At shipment, the domain name for the controller is
“WORKGROUP.”
The destination names follow these conventions:
[\\GL<XXXXXXXXXXXX>] – [\GL_SHARE] – [\Group
Number – Group Name – Template name]
where: GL<XXXXXXXXXXXX> represents the Media Access
Control (MAC) address of the network interface card in the
controller.